Pi
Jump to navigation
Jump to search
For setting up the Pi, see Setting up the Pi.
For connecting to the Pi, see Connecting to the Pi.
Giving the Pi the Internet
Go to the fifth floor of Upson and stand outside the bike lab, then use the LocomotionLab wifi as detailed in Connecting to the Pi#General notes.
If you don't want to walk, set up a hotspot on your phone and then run these commands:
sudo ip link set dev wlan0 up
(then wait 30 seconds or however long it takes before the next command stops giving an error message)
sudo iw dev wlan0 connect -w 'NAME OF WIFI NETWORK'
(then wait about 30 seconds or so)
sudo dhclient