Setting up the Pi

From Bike Wiki
Revision as of 21:58, 3 February 2020 by Apr65 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Before connecting to the Pi, it needs to be set up. First, connect the Pi to the GPS to charge using the microUSB to USB cable. Then, connect the GPS to the wall output using the 12 Volt charger. Use the shiny cable to connect the Arduino to the GPS. You should now be able to connect to rPIWireless (Connecting to the Pi).

Retrieved from "http://ec2-18-191-134-9.us-east-2.compute.amazonaws.com/wiki/index.php?title=Setting_up_the_Pi&oldid=325"