Todo list
Jump to navigation
Jump to search
The master todo list. When you notice tasks that should be done eventually, add them here. We can split this list up if it gets too long.
- Figure out whether the absolute position of the encoder is drifting. Every loop, if the index position (channel Z value) has changed, print out the REG_TC0_CV1 value. This should be equal to x_offset, as calculated during front wheel calibration. If it isn't, then the absolute position of the encoder is drifting, which needs to be fixed. If not, we're fine.
- Add the cylindrical shell back to the front motor column to reduce stress on the screws
- Make a new header file (potential name: bike_pins.h) that has many #define statements for standard pin names
- Extract ROS code to a new compilation unit
- Modify the Pi's wifi configuration to use eduroam/RedRover/etc (or maybe an ad-hoc network hosted by the laptop) instead of LocomotionLab
