Difference between revisions of "Setting up the Pi"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
Before connecting to the Pi, it needs to be set up. | Before connecting to the Pi, it needs to be set up. | ||
| − | First, connect the Pi to the GPS to charge using the microUSB to USB cable. Then, connect the GPS to the wall output using the 12 Volt charger. Use the shiny cable to connect the Arduino to the GPS. You should now be able to connect to rPIWireless. | + | First, connect the Pi to the GPS to charge using the microUSB to USB cable. Then, connect the GPS to the wall output using the 12 Volt charger. Use the shiny cable to connect the Arduino to the GPS. You should now be able to connect to rPIWireless ([[Connecting to the Pi]]). |
Latest revision as of 21:58, 3 February 2020
Before connecting to the Pi, it needs to be set up. First, connect the Pi to the GPS to charge using the microUSB to USB cable. Then, connect the GPS to the wall output using the 12 Volt charger. Use the shiny cable to connect the Arduino to the GPS. You should now be able to connect to rPIWireless (Connecting to the Pi).
